|
A railway electrification system supplies electric power to railway trains and trams without an on-board prime mover or local fuel supply. Electrification has many advantages but requires significant capital expenditure. Selection of an electrification system is based on economics of energy supply, maintenance, and capital cost compared to the revenue obtained for freight and passenger traffic. Different systems are used for urban and intercity areas; some electric locomotives can switch to different supply voltages to allow flexibility in operation. ==Characteristics of railway electrification== Electric railways use electric locomotives to haul passengers or freight in separate cars or electric multiple units, passenger cars with their own motors. Electricity is typically generated in large and relatively efficient generating stations, transmitted to the railway network and distributed to the trains. Some electric railways have their own dedicated generating stations and transmission lines but most purchase power from an electric utility. The railway usually provides its own distribution lines, switches and transformers. Power is supplied to moving trains with a (nearly) continuous conductor running along the track that usually takes one of two forms. The first is an overhead line or catenary wire suspended from poles or towers along the track or from structure or tunnel ceilings. Locomotives or multiple units pick up power from the contact wire with pantographs on their roofs that press a conductive strip against it with a spring or air pressure. Examples are described later in this article. The other is a third rail mounted at track level and contacted by a sliding "pickup shoe". Both overhead wire and third-rail systems usually use the running rails as the return conductor but some systems use a separate fourth rail for this purpose. In comparison to the principal alternative, the diesel engine, electric railways offer substantially better energy efficiency, lower emissions and lower operating costs. Electric locomotives are usually quieter, more powerful, and more responsive and reliable than diesels. They have no local emissions, an important advantage in tunnels and urban areas. Some electric traction systems provide regenerative braking that turns the train's kinetic energy back into electricity and returns it to the supply system to be used by other trains or the general utility grid. While diesel locomotives burn petroleum, electricity is generated from diverse sources including many that do not produce carbon dioxide such as nuclear power and renewable forms including hydroelectric, geothermal, wind and solar. Disadvantages of electric traction include high capital costs that may be uneconomic on lightly trafficked routes; a relative lack of flexibility since electric trains need electrified tracks or onboard supercapacitors and charging infrastructure at stations;〔(【引用サイトリンク】title=Guangzhou supercapacitor tram unveiled )〕 and a vulnerability to power interruptions. Different regions may use different supply voltages and frequencies, complicating through service. The limited clearances available under catenaries may preclude efficient double-stack container service. The lethal voltages on contact wires and third rails are a safety hazard to track workers, passengers and trespassers. Overhead wires are safer than third rails, but they are often considered unsightly. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「railway electrification system」の詳細全文を読む スポンサード リンク
|